Mission Metal Detector Sales | Minelab E-Trac Metal Detector

E-Trac

FREE SHIPPING!

Mission Metal Detector Sales: $1,498.95
MSRP: $1,895.00

Minelab's Most Technologically Advanced Detector!

Its sleek, sturdy design, innovative control panel, intuitive menus, clear LCD, robust lightweight coil and comprehensive targeting options set E-Trac apart from any other detector available today.

Minelab has taken a further ground breaking step by incorporating a USB interface, which will allow you to download and upload E-Trac settings, User Modes, and Discrimination Patterns using your own Personal Computer.

E-Trac will locate valuable metal objects in a variety of mineralized ground conditions such as extremely salty soils, sea water, wet beach sand and highly magnetic ground conditions. By using the E-Trac you can become one of the many successful detectorists who combine their passion for the outdoors with the excitement of discovering valuable coins, relics, gold and jewelry on a regular basis.

E-Trac Technology

E-Trac Technology delivers Full Band Spectrum (FBS) with Simultaneous Frequencies ranging from 1.5kHz - 100kHz through its powerful microprocessor. The frequency range means that the signal received from the detector coil is analyzed from a wide range of responses. This allows E-Trac's advanced signal processing to rate detected objects according to their ferrous and conductivity (FE-CO) characteristics and analyze more target information so that the target identification (ID) is more accurate.

Minelab's Smartfind™ is a unique two-dimensional scale of discrimination. Smartfind™ graphically represents both the ferrous and conductivity properties on the same display. This combined with E-Trac's target Discrimination ability eliminates signals from undesired targets and accepts signals from desired targets. E-Trac's technology means:

Greater detecting depth
High sensitivity over a wide range of targets
Less interference from electromagnetic sources
More accurate identification of target characteristics

E-Trac Xchange

E-Trac Xchange allows you to download and upload detector settings and Discrimination Patterns via USB to your Personal Computer. This advanced feature is designed to allow you to quickly configure the E-Trac to particular detecting environments and preferred targets.

You can always share your experiences and settings with other detectorists. The installation CD and Xchange User Guide supplied with your E-Trac ensure you can get started straight away.

You can build a resource library charting your success with your E-Trac. Download and store your valuable Settings, User Modes and Patterns for your favorite sites and upload them as required. There's no limit to the number you can store on your PC, so make the most of your E-Trac and never worry about losing your successful settings again!

FEATURES:

Transmission Technology: Full Band Spectrum (FBS) Multi frequency Technology
Microprocessor: 32bit, 48MHz microprocessor fast and powerful
Connectivity: USB connector for communication with Personal Computer
Software: Intuitive User Interface; Fast Target processing; Multi-language functionality
QuickMask: Fast and Easy adjustment of Ferrous and Conductivity Discrimination
Depth Gauge: Accurate Gauge active in Normal detecting and Pinpoint mode
Noise Cancel: Automatic & Manual selection of 11 channels
Pinpoint: Non-motion with modulated audio and visual cross hair on LCD
- 2 Modes Normal and Sizing
User Modes: 4 Minelab Modes and 4 My Modes
Discrimination: 2 Dimensional Smartfind Discrimination
Target Identification: 2 Dimensional Smartfind Size / Conductivity and Ferrous characteristics:
- Conductivity 1-50, Ferrous 1-35
Sensitivity Adjustment: Fully Automatic with adjustable offset, Manual Setting 1-30
Sensitivity Gauge: Auto Level, Manual Level, Suggested Level
Threshold: Fine adjustment level from 1-50
Audio Response: 4 Settings: Normal, Long, Smooth, Pitch Hold
Tone ID/Number of Tones: 1, 2, 4 and Multi-tone
- Customizable for Conductivity or Ferrous response
Tone ID Variability: 30 adjustable steps for better Target Identification
Recovery Speed: Selectable Fast & Deep
Trash Density: Low for areas with isolated targets or High, for areas with more trash
Ground Balance Modes: Auto Ground Compensation - Advanced Digital Filtering
Ground Settings: Neutral for most ground conditions, Difficult for more mineralized soils
Coil: Ultra-lightweight 11" Double D (DD) waterproof coil
Batteries: 1600 mAh NiMH or Alkaline batteries
Low Battery Audio Alarm: Audio and visual indication
Visual Display: Large 3.4 (8.65cm) grayscale LCD panel
- with Contrast adjustment and Backlight
Headphone Input: 100 Ω Stereo Jack

Accessories

Coils and Coil Covers
11" Explorer SE Pro Coil DD	$198.95
8" FBS Coil w/Lower Shaft	$179.95
8" All Terrain Coil Cover (Fits he 2021-0083 for X-Terra)	$9.95
10.5" Coil Cover, Explorer	$16.95
10" Slimline Coil/Explorer SE	$219.95
10" Slimline Coil Cover SE	$12.95
11" DD Pro Coil Cover	$14.95
Battery Accessories
NiMH Battery, 1600mAH	$69.95
NiMH Battery, 1800mAH	$99.95
NiMH Battery, 1500 mAH	$69.95
VANSON NIMH Charger	$26.95
VANSON 1600 mah Nimh Batteries 4pk	$14.95
Alkaline Battery Holder, Exp II	$16.95
110V NiMH Battery Charger (Mains)	$14.95
12V NiMH Car Charger (Exp & Quattro)	$49.95
Rubber Seal, Battery Compartment, Exp II	$6.95
Mastering the Explorer's & E-Trac by Andy Sabisch	$14.95
Shaft Accessories
Upper Shaft Assembly, Explorer SE (BLACK)	$34.95
Upper Shaft Assembly, Quattro	$42.95
Armrest Cup, Explorer	$11.95
Armrest Strap w/Buckle	$5.95
Tall man Lower Shaft	$44.95
Lower Shaft Assembly, E-Trac ( Replacement for # 8017-0011)	$42.95
Headphones
Koss 1/4" Headphones	$49.95
Miscellaneous Accessories
Carry Bag Generic Poly	$49.95
Control Box Cover	$9.95
Nut and Bolt, 8" Coil (5pk)	$7.95
Nut and Bolt, 10" Coil (5pk)	$7.95
Washer, Coil (10pk)	$5.95
Manual, Explorer SE	$11.95
Manual, Quattro	$11.95
Manual , E-Trac	$11.95
Handle Grip	$6.95